Ametek ReFlex Programming Manual Bedienungsanleitung PDF herunterladen (Seite 112)

ReFlex Power™ Programming Manual AC Module Remote Programming

108 M380056-03 Rev L

4.11

SYSTEM SCPI COMMANDS

4.11.1

SYSTEM

SCPI

OMMAND

UMMARY

SYSTem

:ERRor?

4.11.2

SYSTEM

SCPI

OMMAND

EFERENCE

Command

Description

SYSTem

SYSTEM subset of SCPI command sets

:ERRor?

Returns the last error logged in the Error/Event Queue. If there are no errors,

0, No error is returned.

4.12

EXAMPLE SCPI COMMANDS TO SET PHASE AND

PARALLEL GROUPS

4.12.1 E

XAMPLES

REATING A

HASE

ROUP

EXAMPLE 1: Set the group using 3 AC module (units at slot 4, 8,12)

Slot 4, Module will become master of the phase group and the slot 8 and 12 units will be the

slaves of the phase group. Default phase angle for the slot 4 = 0 degrees, slot 8 = 120

degrees and slot 12 = 240 degrees.

SYSTem:GROup:DEFine:PHASe 4,8,12 // Command to form the phase group.

SYSTem:GROup:CAT:PHASe? // Query the group

OUTP1004:STATE 1 // Turn on all the units as a group

*OPC1004? // Send next command after a ‘1’ is returned

SOUR1004:VOLT 125 // Set the group to 125 volts

*OPC1004? // Send next command after a ‘1’ is returned

SOUR1004:CURR 3 // Set all the modules to 3 Amps

*OPC1004? // Send next command after a ‘1’ is returned

SOUR12:PHASE 220 // Set the slot 12 AC module to 220 degree phase

SOUR8:PHASE 100 // Set the slot 8 AC module to 100 degree phase

*OPC12? // Send next command after a ‘0’ is returned

*OPC8? // Send next command after a ‘0’ is returned

SOUR4:PHASE -20 // Set the phase of slot 4 unit to -20 degree and

execute a synchronous phase change on all three

units.

*OPC4? // Send next command after a ‘1’ is returned

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 133 134

Kommentare zu diesen Handbüchern

Keine Kommentare

Ametek ReFlex Programming Manual Bedienungsanleitung Seite 112

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ametek ReFlex Programming Manual