Ametek BPS Series Programming Manual Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ametek BPS Series Programming Manual herunter. AMETEK BPS Series Programming Manual User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 226
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen

Inhaltsverzeichnis

Seite 1 - SCPI Programming Manual

7003-961 Rev AA www.programmablepower.com BPS / Mx / RS Series SCPI Programming Manual (Including MX Series I / Series II)

Seite 2

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 10 Manual P/N 7003-961 Rev AA 1. Introduction This manual cont

Seite 3

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 100 Manual P/N 7003-961 Rev AA 4.20 Source Subsystem - PONSetu

Seite 4 - WARNING

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 101 PONSetup:CURRent This command sets the ini

Seite 5 - SAFETY SYMBOLS

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 102 Manual P/N 7003-961 Rev AA PONSetup:OUTPut[:RELay] This com

Seite 6 - PRODUCT RETURN PROCEDURE

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 103 PONSetup:VOLTage:MODE This command sets th

Seite 7 - Table of Contents

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 104 Manual P/N 7003-961 Rev AA 4.21 Source Subsystem - Pulse T

Seite 8

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 105 Parameter Set Action DCYCle PERiod WID

Seite 9 - Table of Tables

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 106 Manual P/N 7003-961 Rev AA PULSe:WIDTh This command sets th

Seite 10 - Introduction

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 107 4.22 Source Subsystem - Voltage This subs

Seite 11 - External References

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 108 Manual P/N 7003-961 Rev AA VOLTage Phase Selectable This co

Seite 12 - Introduction to Programming

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 109 VOLTage:MODE Phase Selectable This command

Seite 13

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 11 • Maximum DC offset range in AC+DC mode is

Seite 14 - Introduction to SCPI

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 110 Manual P/N 7003-961 Rev AA Note Effecting a range change t

Seite 15 - The SCPI Command Tree

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 111 Command Syntax [SOURce:]VOLTage:SLEW[:IMM

Seite 16

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 112 Manual P/N 7003-961 Rev AA VOLTage:SLEW:MODE Phase Selectab

Seite 17 - The Message Unit

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 113 4.23 Status Subsystem Commands This subsy

Seite 18 - Combining Message Units

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 114 Manual P/N 7003-961 Rev AA STATus:OPERation:EVENt? This que

Seite 19 - Message Unit Separator

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 115 Bit Configuration of Questionable Register

Seite 20 - Message Terminator

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 116 Manual P/N 7003-961 Rev AA STATus:QUEStionable:INSTrument:I

Seite 21 - Character Data

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 117 4.24 System Commands The system commands

Seite 22 - Agilent 82350 Driver

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 118 Manual P/N 7003-961 Rev AA This query returns the SCPI vers

Seite 23

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 119 Command Syntax SYSTem:LOCal Parameters No

Seite 24 - RS232C Interface

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 12 Manual P/N 7003-961 Rev AA 1.5 Introduction to Programmin

Seite 25 - Serial Cable Diagram

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 120 Manual P/N 7003-961 Rev AA SYSTem:CONFigure:NOUTput Sets th

Seite 26 - USB Interface

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 121 Command Syntax SYSTem:COMMunicate:LAN:ADD

Seite 27

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 122 Manual P/N 7003-961 Rev AA Command Syntax SYSTem:COMMunica

Seite 28

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 123 SYSTem:COMMunicate:SERial:BAUD This comman

Seite 29

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 124 Manual P/N 7003-961 Rev AA 4.25 Trace Subsystem Commands

Seite 30

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 125 TRACe:CATalog These commands return a list

Seite 31

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 126 Manual P/N 7003-961 Rev AA 4.26 Trigger Subsystem This sub

Seite 32

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 127 INITiate[:IMMediate][:TRANsient] The INITi

Seite 33

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 128 Manual P/N 7003-961 Rev AA TRIGger[:TRANSient]:SOURce This

Seite 34 - USB Interface Use

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 129 TRIGger:ACQuire:SOURce [3Pi Controller On

Seite 35 - Setting the TCP/IP Address

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 13 1.5.4 RS232C Capabilities of the AC source

Seite 36

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 130 Manual P/N 7003-961 Rev AA TRIG:STATe? This is a query only

Seite 37 - IP Ping

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 131 5. Common Commands Common commands begin

Seite 38 - SCPI Command Reference

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 132 Manual P/N 7003-961 Rev AA 5.1 *CLS This command clears th

Seite 39 - Calibration Subsystem

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 133 5.2 *ESE This command programs the Stand

Seite 40 - :IMPedance

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 134 Manual P/N 7003-961 Rev AA 5.4 *IDN? This query requests t

Seite 41

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 135 5.6 *OPT? This query requests the AC sour

Seite 42 - Current Measurement

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 136 Manual P/N 7003-961 Rev AA 5.7 *PSC This command controls

Seite 43

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 137 5.9 *RST The reset (*RST) command has the

Seite 44 - Voltage Measurement

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 138 Manual P/N 7003-961 Rev AA 5.10 *SAV This command stores t

Seite 45

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 139 5.12 *STB? This query reads the Status By

Seite 46 - Output Phase

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 14 Manual P/N 7003-961 Rev AA 2. Introduction to SCPI SCPI (St

Seite 47 - Output - AC Voltage

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 140 Manual P/N 7003-961 Rev AA 5.13 *TRG This command generate

Seite 48

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 141 6. Programming Examples 6.1 Introduction

Seite 49 - Output - DC Voltage

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 142 Manual P/N 7003-961 Rev AA 6.2 Programming the Output 6.2

Seite 50

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 143 Voltage Ranges The power source has two vo

Seite 51 - Display Subsystem

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 144 Manual P/N 7003-961 Rev AA 6.2.5 Programming the Output Ph

Seite 52

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 145 6.2.7 Waveform Shapes At *RST, the AC/DC

Seite 53 - Instrument Subsystem

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 146 Manual P/N 7003-961 Rev AA 6.2.8 Individual Phases On thre

Seite 54

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 147 6.3 Coupled Commands This section describ

Seite 55

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 148 Manual P/N 7003-961 Rev AA 6.4 Programming Output Transien

Seite 56 - Current Array Data

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 149 6.4.1 Transient System Model Figure 6-1 s

Seite 57

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 15 2.2.2 Types of SCPI Messages There are two

Seite 58

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 150 Manual P/N 7003-961 Rev AA 6.4.2 Step and Pulse Transients

Seite 59

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 151 6.4.3 List Transients List mode lets you

Seite 60 - Voltage Array Data

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 152 Manual P/N 7003-961 Rev AA LIST:VOLTage 120, 100, 110 LIST:

Seite 61

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 153 6.5 Triggering Output Changes The followi

Seite 62

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 154 Manual P/N 7003-961 Rev AA 6.5.2 Initiating the Output Tri

Seite 63

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 155 6.5.4 Generating Triggers Providing that

Seite 64

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 156 Manual P/N 7003-961 Rev AA 6.6 Acquiring Measurement Data

Seite 65

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 157 6.6.1 Voltage and Current Measurements To

Seite 66

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 158 Manual P/N 7003-961 Rev AA 6.6.4 Harmonic Measurements The

Seite 67 - Phase Measurement Subsystem

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 159 6.6.5 Simultaneous Output Phase Measureme

Seite 68 - Power Measurement Subsystem

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 16 Manual P/N 7003-961 Rev AA If you enter SOURCe the active he

Seite 69

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 160 Manual P/N 7003-961 Rev AA 6.6.8 Measurement Trigger Syste

Seite 70

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 161 6.6.10 Selecting the Measurement Trigger

Seite 71

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 162 Manual P/N 7003-961 Rev AA 6.7 Controlling the Instantaneo

Seite 72

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 163 6.7.2 Pre-event and Post-event Triggering

Seite 73 - Output Relay

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 164 Manual P/N 7003-961 Rev AA 6.8 Trigger System Summary Figu

Seite 74 - Output Remote Inhibit Modes

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 165 7. Status Registers You can use status re

Seite 75

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 166 Manual P/N 7003-961 Rev AA 12481651210242048409681921248165

Seite 76 - External Trigger Output

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 167 Bit Signal Meaning Operation Status Gro

Seite 77

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 168 Manual P/N 7003-961 Rev AA 7.3 Questionable Status Group T

Seite 78

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 169 7.4 Standard Event Status Group This grou

Seite 79 - Source Subsystem - Current

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 17 Including Common Commands You can combine c

Seite 80

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 170 Manual P/N 7003-961 Rev AA 7.6 Examples The following sect

Seite 81 - Source Subsystem - Frequency

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 171 7.7 SCPI Command Completion SCPI commands

Seite 82

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 172 Manual P/N 7003-961 Rev AA 8. Option Commands 8.1 Introdu

Seite 83

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 173 8.2 IEC 1000-4-11 (-411) The following ar

Seite 84

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 174 Manual P/N 7003-961 Rev AA IEC411:DIPS:RUN[:ALL] This comma

Seite 85

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 175 IEC411:DIPS:ANGLe This command sets the s

Seite 86 - Source Subsystem - Limit

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 176 Manual P/N 7003-961 Rev AA IEC411:VARiants:HOLD:TIME This c

Seite 87

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 177 8.3 IEC 1000-4-13 (-413) 8.3.1 IEC 1000-

Seite 88

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 178 Manual P/N 7003-961 Rev AA :PAUSe Set harmonics paus

Seite 89

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 179 IEC413:INDVidual:HARMonics[:NUMBer] This

Seite 90 - Source Subsystem - List

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 18 Manual P/N 7003-961 Rev AA 2.4.2 Combining Message Units Th

Seite 91 - List - Dwell

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 180 Manual P/N 7003-961 Rev AA IEC413:GROup This command is us

Seite 92 - List - Frequency

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 181 IEC413:MCURve:LEVel This command will set

Seite 93

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 182 Manual P/N 7003-961 Rev AA Command Syntax IEC413:FCURve:PA

Seite 94 - List - Step

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 183 IEC413:SWEep:LEVel This command will set t

Seite 95 - List:TTL Trigger Out

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 184 Manual P/N 7003-961 Rev AA IEC413:SWEep:CURRent:RESonant?

Seite 96 - List:Voltage

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 185 IEC413:HARMonics:TABle This command allows

Seite 97

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 186 Manual P/N 7003-961 Rev AA Command Syntax IEC413: IHARmoni

Seite 98 - Source Subsystem - Mode

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 187 IEC413:IHARmonics:PAUSe This command will

Seite 99 - Source Subsystem - Phase

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 188 Manual P/N 7003-961 Rev AA 8.3.2 Interharmonics Subsystem

Seite 100 - Source Subsystem - PONSetup

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 189 [:SOURce]:IHARmonics:REFerence This comman

Seite 101

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 19 2.4.3 Headers Headers are instructions rec

Seite 102

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 190 Manual P/N 7003-961 Rev AA 8.4 RTCA/DO-160D (-160) The fo

Seite 103

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 191 DO160:NORMal:VOLT_FREQ:MINimum This comman

Seite 104 - Source Subsystem - Pulse

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 192 Manual P/N 7003-961 Rev AA DO160:NORMal:VOLTage:MODulation

Seite 105

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 193 DO160:NORMal:FREQuency:MODulation This co

Seite 106

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 194 Manual P/N 7003-961 Rev AA DO160:EMERgency:VOLT_FREQ:MAXimu

Seite 107 - Source Subsystem - Voltage

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 195 DO160:ABNormal:VOLTage:OVER This command w

Seite 108

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 196 Manual P/N 7003-961 Rev AA DO160:STANdard This command wil

Seite 109

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 197 8.5 MIL-STD 704E (-704) MIL-STD 704 tests

Seite 110

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 198 Manual P/N 7003-961 Rev AA 8.5.2 DC System :MIL704 :VERS

Seite 111

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 199 8.6 Airbus ABD0100.1.8 Test Option (-ABD)

Seite 112

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 2 Manual P/N 7003-961 Rev AA SCPI Programming Reference Manual

Seite 113 - Status Subsystem Commands

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 20 Manual P/N 7003-961 Rev AA 2.4.6 Root Specifier When it pre

Seite 114

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 200 Manual P/N 7003-961 Rev AA 8.10 OMNI Reference Impedance T

Seite 115

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 201 8.11 Watt Hour Meter (-WHM) The following

Seite 116

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 202 Manual P/N 7003-961 Rev AA 8.12 Current Sink Option (-SNK)

Seite 117 - System Commands

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 203 REGenerate:DELay:FREQuency[:SHUTdown] This

Seite 118

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 204 Manual P/N 7003-961 Rev AA REGenerate:OUTPut[:STATe] This c

Seite 119

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 205

Seite 120

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 206 Manual P/N 7003-961 Rev AA Appendix A: SCPI Command tree Th

Seite 121

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 207 ... ... ... ...

Seite 122

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 208 Manual P/N 7003-961 Rev AA ... ... ...

Seite 123

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 209 ... ... ... MODE

Seite 124

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 21 2.5 SCPI Data Formats All data programmed

Seite 125

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 210 Manual P/N 7003-961 Rev AA ... ... VRANGE 135

Seite 126 - Trigger Subsystem

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 211 ... ... ... ADDRes

Seite 127

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 212 Manual P/N 7003-961 Rev AA Appendix B: SCPI Conformance Inf

Seite 128

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 213 Appendix C: Error Messages Any errors that

Seite 129

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 214 Manual P/N 7003-961 Rev AA Number Message String Cause R

Seite 130

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 215 Number Message String Cause Remedy -300

Seite 131 - Common Commands

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 216 Manual P/N 7003-961 Rev AA Number Message String Cause R

Seite 132 - 5.1 *CLS

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 217 Number Message String Cause Remedy 13 &

Seite 133 - 5.3 *ESR?

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 218 Manual P/N 7003-961 Rev AA Number Message String Cause R

Seite 134 - 5.5 *OPC

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 219 Index **CLS ...

Seite 135 - 5.6 *OPT?

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 22 Manual P/N 7003-961 Rev AA 3. System Considerations and Int

Seite 136 - 5.8 *RCL

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 220 Manual P/N 7003-961 Rev AA CALibrate:MEASure:CURRent:TEMPer

Seite 137 - 5.9 *RST

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 221 FETCh:CURRent:CREStfactor? ...

Seite 138 - 5.11 *SRE

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 222 Manual P/N 7003-961 Rev AA IEC413:INDVidual:IHARMonics[:FRE

Seite 139 - 5.12 *STB?

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 223 MMAC Address ...

Seite 140 - 5.14 *WAI

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 224 Manual P/N 7003-961 Rev AA OUTPut:TTLTrg[:STATe] ...

Seite 141 - Programming Examples

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 225 STATus:QUEStionable:INSTrument:ISUMmary:CO

Seite 142 - AC Voltage and Frequency

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 226 Manual P/N 7003-961 Rev AA data format modes ...

Seite 143

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 23 If there is no error-handling code in your

Seite 144 - Current Limit

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 24 Manual P/N 7003-961 Rev AA 3.3 RS232C Interface MX/RS/BPS p

Seite 145 - Waveform Shapes

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 25 3.3.2 Serial Cable Diagram For MX/RS/BPS u

Seite 146 - Individual Phases

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 26 Manual P/N 7003-961 Rev AA 3.4 USB Interface A standard USB

Seite 147 - Coupled Commands

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 27 When the “Found New Hardware Wizard” dial

Seite 148

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 28 Manual P/N 7003-961 Rev AA The next dialog will ask you to

Seite 149 - LIST mode

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 29 Once completed, the dialog box shown abov

Seite 150 - Step and Pulse Transients

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 3 About AMETEK AMETEK Programmable Power, Inc.

Seite 151 - List Transients

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 30 Manual P/N 7003-961 Rev AA Step 2: USB to Com Virtual Device

Seite 152

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 31 The next dialog will ask you to install t

Seite 153 - Trigger System Model

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 32 Manual P/N 7003-961 Rev AA

Seite 154

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 33 The USB to Com virtual port is now availabl

Seite 155 - Generating Triggers

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 34 Manual P/N 7003-961 Rev AA 3.4.2 USB Interface Use Note tha

Seite 156 - Acquiring Measurement Data

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 35 3.5 LAN Interface Option An Ethernet LAN i

Seite 157 - Frequency Measurements

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 36 Manual P/N 7003-961 Rev AA Use the “Locate IP” button on t

Seite 158 - Harmonic Measurements

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 37 3.5.3 Socket Port Number Now that a connec

Seite 159 - Triggering Measurements

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 38 Manual P/N 7003-961 Rev AA 4. SCPI Command Reference 4.1 I

Seite 160 - INIT[:IMM]:ACQ

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 39 4.2 Calibration Subsystem The commands in

Seite 161

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 4 Manual P/N 7003-961 Rev AA Important Safety Instructions Bef

Seite 162

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 40 Manual P/N 7003-961 Rev AA [:FSCale] Calibrate full-sc

Seite 163 - 4096 DATA POINTS

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 41 4.2.1 Password CALibrate:PASSword This com

Seite 164 - Trigger System Summary

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 42 Manual P/N 7003-961 Rev AA 4.2.3 Current Measurement CALibr

Seite 165 - Status Registers

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 43 CALibrate:MEASure:CURRent:TEMPerature:DC[:F

Seite 166

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 44 Manual P/N 7003-961 Rev AA 4.2.4 Voltage Measurement CALibr

Seite 167

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 45 CALibrate:MEASure:VOLTage:TEMPerature:DC[:F

Seite 168 - Questionable Status Group

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 46 Manual P/N 7003-961 Rev AA 4.2.5 Output Phase CALibrate:PHA

Seite 169 - Status Byte Register

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 47 4.2.7 Output - AC Voltage CALibrate[:SOURc

Seite 170 - Examples

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 48 Manual P/N 7003-961 Rev AA CALibrate[:SOURce]:VOLTage[:AC]:H

Seite 171 - SCPI Command Completion

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 49 4.2.8 Output - DC Voltage CALibrate[:SOURc

Seite 172 - Option Commands

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 5 SAFETY SYMBOLS

Seite 173 - IEC 1000-4-11 (-411)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 50 Manual P/N 7003-961 Rev AA 4.2.9 Output - Impedance [MX15-

Seite 174

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 51 4.3 Display Subsystem This subsystem allows

Seite 175

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 52 Manual P/N 7003-961 Rev AA DISPlay:TEXT This command sets th

Seite 176

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 53 4.4 Instrument Subsystem The Instrument sub

Seite 177 - IEC 1000-4-13 Subsystem

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 54 Manual P/N 7003-961 Rev AA INSTrument:SELect This command ma

Seite 178

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 55 4.5 Array Measurement Subsystem [3Pi Cont

Seite 179

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 56 Manual P/N 7003-961 Rev AA 4.5.1 Current Array Data MEASure

Seite 180

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 57 Query Syntax MEASure:ARRay:CURRent:HARMoni

Seite 181

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 58 Manual P/N 7003-961 Rev AA 4.5.2 Waveform Array Data Format

Seite 182

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 59 If iChar > 9 Then iChar = iChar

Seite 183

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 6 Manual P/N 7003-961 Rev AA Product Family: BPS / MX / RS Se

Seite 184

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 60 Manual P/N 7003-961 Rev AA 4.5.3 Voltage Array Data MEASure

Seite 185

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 61 Query Syntax MEASure:ARRay:VOLTage:HARMoni

Seite 186

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 62 Manual P/N 7003-961 Rev AA 4.6 Current Measurement Subsyste

Seite 187

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 63 MEASure:CURRent:DC? FETCh:CURRent:DC? Phase

Seite 188 - Interharmonics Subsystem

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 64 Manual P/N 7003-961 Rev AA MEASure:CURRent:CREStfactor? FETC

Seite 189

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 65 MEASure:CURRent:HARMonic:PHASe? [3Pi Cont

Seite 190 - RTCA/DO-160D (-160)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 66 Manual P/N 7003-961 Rev AA 4.7 Frequency Measurement Subsys

Seite 191

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 67 4.8 Phase Measurement Subsystem This subsy

Seite 192 - VOLTAGE UNDER

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 68 Manual P/N 7003-961 Rev AA 4.9 Power Measurement Subsystem

Seite 193

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 69 MEASure:POWer:AC:PFACtor? FETCh:POWer[:AC]:

Seite 194

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 7 Table of Contents 1. Introduction ...

Seite 195

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 70 Manual P/N 7003-961 Rev AA 4.10 Voltage Measurement Subsyst

Seite 196

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 71 MEASure:VOLTage:HARMonic? [3Pi Controller

Seite 197 - AC System

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 72 Manual P/N 7003-961 Rev AA MEASure:VOLTage:HARMonic:THD? [3

Seite 198 - Programming Considerations

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 73 4.11 Output Subsystem This subsystem contr

Seite 199

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 74 Manual P/N 7003-961 Rev AA OUTPut:IMMediate This command ope

Seite 200 - OMNI Reference Impedance

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 75 OUTPut:RI:MODE Available on MX/RS/BPS Serie

Seite 201 - Watt Hour Meter (-WHM)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 76 Manual P/N 7003-961 Rev AA 4.11.4 External Trigger Output O

Seite 202 - Current Sink Option (-SNK)

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 77 Command Syntax OUTPut:TTLTrg:SOURce<sou

Seite 203

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 78 Manual P/N 7003-961 Rev AA 4.11.5 Programmable Impedance [

Seite 204

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 79 4.12 Source Subsystem - Current This subsy

Seite 205

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 8 Manual P/N 7003-961 Rev AA 5. Common Commands ...

Seite 206

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 80 Manual P/N 7003-961 Rev AA CURRent:PROTection:STATe This com

Seite 207

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 81 4.13 Source Subsystem - Frequency This sub

Seite 208

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 82 Manual P/N 7003-961 Rev AA FREQuency:SLEW This command sets

Seite 209

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 83 FREQuency:SLEW:TRIGgered This command sets

Seite 210

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 84 Manual P/N 7003-961 Rev AA 4.14 Source Subsystem - Function

Seite 211

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 85 FUNCtion:MODE Phase selectable This command

Seite 212 - SCPI Version

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 86 Manual P/N 7003-961 Rev AA 4.15 Source Subsystem - Limit Th

Seite 213 - Appendix C: Error Messages

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 87 Command Syntax [SOURce:]LIMit:VOLTage <

Seite 214

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 88 Manual P/N 7003-961 Rev AA 4.16 Sense Subsystem - Sweep [3

Seite 215

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 89 SENSe:SWEep:TINTerval This command and its

Seite 216

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 9 Table of Figures Figure 2-1 : Partial Comma

Seite 217

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 90 Manual P/N 7003-961 Rev AA 4.17 Source Subsystem - List Thi

Seite 218 - Table 8-4 : Error Messages

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 91 4.17.1 List - Count LIST:COUNt This comman

Seite 219

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 92 Manual P/N 7003-961 Rev AA 4.17.3 List - Frequency LIST:FRE

Seite 220

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 93 4.17.4 List:Waveform Function [3Pi Contro

Seite 221

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 94 Manual P/N 7003-961 Rev AA 4.17.5 List - Repeat LIST:REPeat

Seite 222

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 95 4.17.7 List:TTL Trigger Out LIST:TTLTrg Th

Seite 223

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 96 Manual P/N 7003-961 Rev AA 4.17.8 List:Voltage LIST:VOLTage

Seite 224

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 97 LIST:VOLTage:SLEW:POINts? Phase Selectable

Seite 225

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual 98 Manual P/N 7003-961 Rev AA 4.18 Source Subsystem - Mode The

Seite 226

BPS / MX / RS Series SCPI Programming Manual AMETEK Programmable Power Manual P/N 7003-961 Rev. AA 99 4.19 Source Subsystem - Phase This subsyst

Kommentare zu diesen Handbüchern

Keine Kommentare