Ametek PLA-PLW Programming Manual Bedienungsanleitung PDF herunterladen (Seite 31)

MODE COMMANDS

[SOURce:]MODe

The commands sets and query the input regulation mode of the electronic load.

CURRent constant current mode

POWer constant power mode

RESistance constant resistance mode

VOLTage constant voltage mode

Command Syntax MODe <CRD>

Parameters CURR | POW | RES | VOLT

*RST Value CURR

Query Syntax MODe?

Returned Parameters <CRD> CURR= constant current mode

POW= constant power mode

RES= constant resistance mode

VOLT= constant voltage mode

[SOURce:]MODe:RANGe

The commands sets and query the operating range at the current operating mode.

Note: When Range control (“UTIL:RANG”) is set to AUTO (1), this command will cause

execution error.

Command Syntax MODe:RANGe <NR1>

Parameters range index 0 – Low Range

1 – Middle Range

2 – High Range

3 – Ultra High/Ultra Low Range

Query Syntax MODe:RANGe?

Returned Parameters <NR1>, range index number

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

Keine Kommentare

Ametek PLA-PLW Programming Manual Bedienungsanleitung Seite 31